ASTM A860 WPHY70 TEE
Product Details:
| Connection | Welding |
|---|---|
| Type | Tee |
| Material | Carbon Steel |
| FITTINGS | TEE |
| Butt-welding | ASTM A860 WPHY70 |
Detailed Product Description
ASTM A860 /A860M
Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
GRADE
ASTM A860 WPHY42
ASTM A860 WPHY46
ASTM A860 WPHY52
ASTM A860 WPHY60
ASTM A860 WPHY65
ASTM A860 WPHY70
SIZE RANGE
OD 1/2" - 36"
Tesile Requirements & Chemical Requirements
| TABLE 1 Chemical Requirements | |||||||
| Composition % | |||||||
| Heat | |||||||
| Analysis | |||||||
| Carbon | 0.2(A) | ||||||
| Manganese | 1.00-1.45 | All values are | |||||
| Phosphorus | 0.030 | maximum unless | |||||
| Sulfur | 0.010 | a range is stated | |||||
| Silicon | 0.15-0.40(B) | ||||||
| Nickel | 0.5 © | ||||||
| Chromium | 0.3 © | ||||||
| Molybdenum | 0.25© | ||||||
| Copper | 0.35© | ||||||
| Titanium | 0.05 | ||||||
| Vanadium | 0.10 | ||||||
| Columbium | 0.04 | ||||||
| Vanadium Plus | 0.12 | ||||||
| Columbium | |||||||
| Aluminum | 0.06 | ||||||
| A The carbon equivalent,as calculated by the following formula,shall not exceed 0.42%. | |||||||
| CE = C + | Mn | + | Cr + Mo +V | + | Ni + Cu | ||
| 6 | 5 | 15 | |||||
| B If vacuum carbon deoxidation is used,silicon shall not exceed 0.10% by heat analysis and 0.12% by | |||||||
| product analysis. | |||||||
| C The sum of Ni + Cr +Mo +Cu shall not exceed 1.0%. | |||||||
| TABLE 2 Mechanical Requirements | |||||||
| Property | Grade | ||||||
| WPHY 42 | WPHY 46 | WPHY 52 | WPHY 60 | WPHY 65 | WPHY 70 | ||
| Yield strength,min(A) 0.2% offset,ksi[Mpa] | 42 [290] | 46 [315] | 52 [360] | 60 [415] | 65 [450] | 70 [485] | |
| Tensile strength,ksi[Mpa] | 60 [415] | 63 [435] | 66 [455] | 75 [515] | 77 [530] | 80 [550] | |
| Elongation: | 85 [585] | 88 [605] | 91 [625] | 100 [690] | 102 [705] | 105 [725] | |
| Standard round specimen,or small-size proportional | |||||||
| specimen,min, % in 4D | 25 | 25 | 25 | 20 | 20 | 20 | |
| Rectangular specimen,for section thickness 5/16 in.[7.94mm] | |||||||
| and over, and for all small sizes tested in full section; min;% in | 32 | 32 | 32 | 28 | 28 | 28 | |
| 2 in.[50 mm].Width of specimen 1 1/2 in.[40mm]. | |||||||
| Toughness | B | B | B | B | B | B | |
| C energy absorption©;measured at -50°F [-46°C]. | |||||||
Note:
We are specialised in project work with Tee, Elbow, Bend, Return, Cross, Cap, Reducer and special shaped fittings
ISO 9001:2000 by TUV
Pressure Equipment Directive 97/23/EC(PED)
ASTM A860 WPHY70 TEE
Other Products from this Supplier
See more
A860 WPHY70, ASTM A860 WPHY70, ASTM A860 WPHY70 TEE products from this supplier.
Product Showcase[30]
Products
- Seamless Alloy steel pipes and tubes [1185]
- Seamless or welded carbon pipes & tubes [308]
- seamless or welded stainless steel pipes/ tubes [159]
- fittings [442]
- flanges and forgings [256]
- Inconel, Monel, Hasteloy pipes/ tubes [13]
- steel coils [27]
- casting [10]
- fasteners [6]
- Others [2]
Company Info
Wuxi Sunrising Steel Co., Ltd.
[China]
[Verified Member]
Online Postings: Products
Business Type:Trading Company, Agent
City: Wuxi
Province/State: Jiangsu
Country/Region : China